Products are linked after in-depth research. From qualifying purchases, I receive commissions as an Affiliate Associate but with no extra cost to the buyers.

An ultrasonic cleaner is a special type of portable device made with the objective of cleaning necessary tools. These ultrasonic cleaners act more or less like microwave ovens. The main feature of an ultrasonic cleaner is to use ultrahigh frequency to move the molecules and help to clean most types of metals. The maximum categories of metals that can be cleaned using this ultrasonic device include- jewelry, clipper blades, ring, tools, and more. However, the specific liquid is specialized for using in the ultrasonic frequency cleaner. This liquid accelerates the cleaning process of metals. A few droplets of these special liquids need to be diluted with water. In this way, your required metals can be cleaned easily and within a fixed time.

What Is In Ultrasonic Cleaning Liquid?

Ultrasonic cleaning liquids or solutions are mainly liquid-based solutions that need to be diluted with water before use. These solutions can also be termed solvent-free degreasers. This solution’s most recommended dilution rate with water is 1 to 5 percent. Only a small amount of this solution can remove dirt, debris, extra hair, and plaque that remain stuck within the intervals of two teeth of a blade. The liquid can also prevent corrosion, rusting, lime deposits, oxide layers, and oil deposits on metals.

How Many Types of Ultrasonic Liquid?

There are mainly three types of ultrasonic liquids that are used in an ultrasonic cleaner. These three categories of liquid include- acidic, alkaline, and neutral ultrasonic liquid. Moreover, there are also some other categories of solutions found in the market for this cleaning purpose. Those include- High caustic solution, enzymatic solution, de-ionized solution, and some other specific solution. The following nature of liquids has their individual functions.

What Is Ultrasonic Cleaning Solution Made Of?

Ultrasonic cleaning solutions are some water-based cleansing solutions. They are diluted up to 1 to 5 percent with water. The chief constituents of the liquid used in ultrasonic cleaner include:

Surfactants
Detergents
De-ionized water
Cleansing vinegar diluting in a ratio of 1:1

In reality, using only water in ultrasonic cleaning can also contribute to a great extent. However, adding a small amount of ultrasonic cleaner solution makes the cleaning more magnificent.

How to Know the Ultrasonic Cleaner Liquid Works?

If you genuinely want to determine whether your ultrasonic cleaning liquid is working, you may use a special device named the cavitation meter. This cavitation meter can determine the sound wave frequency of the ultrasonic machine. However, most dog owners don’t prefer investing in this little sector. So the best way to check the liquid without investing is to experiment. You need to put an aluminum foil in the ultrasonic cleaning machine and the liquid used in the ultrasonic cleaner. If the foil becomes pelted along with some small holes, your ultrasonic cleaner works properly.

What Liquid Is Used In Ultrasonic Cleaners For Clipper Blades And Grooming Tools?

Different liquids of various natures are used in ultrasonic cleaners for the purpose of cleaning grooming tools. These include- acidic, alkaline, high caustic solution, enzymatic solution, de-ionized solution, and neutral solutions. These liquids used in the ultrasonic cleaner are described as follows:

Acidic Ultrasonic Cleaning Solution: The acidic cleaning solutions help to protect the tools and metals from corrosion, rust, scale, and lime deposits. They have a pH value of nearly 5.0 or less. But, the popular Sonic Soak is appreciated the most.
Alkaline Ultrasonic Cleaning Solution: The alkaline ultrasonic solutions have a pH value of nearly 10 or greater. These alkaline solutions are the best option for cleaning zinc, copper, brass, tin, and stainless steel. It is also used to clean jewelry. Most of the clipper blades are made of stainless steel. That’s why the alkaline solution gives a better result in such cases.
De-Ionized Water: De-ionized water is also used in the ultrasonic cleaner to clean very delicate stuff, like clothes, rubber, glass, metal, plastic, and fabrics.
High Caustic Ultrasonic Cleaning Liquid Solution: High caustic ultrasonic cleaning is used as the next stage of alkaline solution. These solutions remove oil, heavy waxes, grease, and especially the plaque formed on blades, stainless steel, and cast iron.
Enzymatic Ultrasonic Cleaning Solution: Enzymatic ultrasonic solutions are used mainly in the medical industry. The enzymatic solutions are efficient enough to expel protein-based dirt. It is mainly used for cleaning stainless steel, aluminum, titanium, brass, glass, and plastic.
Neutral Cleansing Solution: Neutral cleansing solutions have many similarities with regular tap water. It helps in removing pigments, dirt, grease, organic compounds, and dust from metal, ceramic, jewelry, plastic, rubber, and glass.
Vinegar: Positive reviews are also derived from owners when you use vinegar up to 1:1 dilute solution. Vinegar contains CH3COOH, which is a weak acid. That’s why vinegar helps by mildly cleansing your clipper blades. But you should rinse the clipper blades immediately to prevent the longer negative effect of that acid.

Can You Put Clipper Blades In Ultrasonic Cleaner?

Clipper blades are either made of carbonized stainless steel or plastic. The ultrasonic cleaner might help clean the plastic using a neutral cleansing solution. But the plastic clipper blades are made of soft and delicate surfaces, which make them less supportive for ultrasonic cleaners. On the other hand, the clipper blades made of stainless steel can be nicely cleaned using the ultrasonic cleaning solution. All types of liquid, as mentioned earlier, used in the ultrasonic cleaner can be used for cleaning clipper blades. These solutions remove plaque, dirt, heavy waxes, and oil in between the teeth of clipper blades.

What Cleaning Liquid Do You Avoid?

The super flammable chemical substances, like Methyl Ethyl Ketone (MEK), Isopropyl alcohol (IPA), and toluene, need to be avoided. These special chemicals are used for sterilizing medical instruments. But they are risky when mixed with water and kept under high sound frequency. Using MEK, IPA, or toluene in ultrasonic cleaner might cause a huge explosion, so you should avoid them.

Wrapping It Up

Ultrasonic cleaner solutions are highly appreciated in cleaning metal parts, especially dog-clipping blades. However, the liquid used in ultrasonic clippers also plays a significant role from this perspective. Solutions of various natures, like alkaline, acidic, neutral, etc., are used as per requirement. But the important matter is to avoid flammable substances as they might cause an explosion.

Vevor Ultrasonic Cleaner Reviews

The VEVOR digital ultrasonic cleaner is constructed with super sturdy ingredients, like- 304 strong and sturdy stainless steel. The material is super durable, and it is corrosion and rust resistive to the same hand. The package includes 2 sets of ultrasonic transducers, which are of industrial grade. The device works with a frequency of 40 kHz that is capable of removing stains within a very few seconds. It also includes a heating temperature range which is RT-176℉/RT-80℃. And the time setting features enable you to continue from 0 to 30 minutes. Anti-skid feet make it most risk-free and stable. Again, the multiple cooling holes also protect the internal part of the ultrasonic cleaner from becoming overheated.

PROS…

Made with 304 strong and sturdy stainless steel
Made with SUS304 premium material
Material is corrosion and rust resistive.
Helps in maintenance, extraction, oxidation, cavitation, and deep cleaning.
Digital timer enables from 0 to 30 minutes, and the heat control has an adjustability of RT-176℉/RT-80℃.
Packaging includes 2 sets of ultrasonic transducers made with industrial-grade materials.
Significantly used for cleaning rings, jewelry, diamond, optical lenses, lenses, small circuit board parts, sunglasses, dog clipper blades, and more.
Effective enough for both professional and personal use
Uses a level of 40 kHz deep frequency level for cleaning the tools in a short time.
Includes an extra thick stainless steel tank of 1.1mm or 0.04 inches.
Has a carrying capacity of 0.8 Gal or 3 liters.
Multiple cooling holes are included for overheating management.
Designed with 4 anti-skid feet to ensure lower slipping risks
Durable and sturdy enough to work for the long run.